OO-C-2764
quality used for the intended purpose in commercial practice. Unless otherwise
specified herein, all equipment, material, and articles incorporated in the work
covered by this specification are to be new and fabricated using materials
produced from recovered materials to the maximum extent possible without
jeopardizing the intended use. The term "recovered materials" means materials
which have been collected or recovered from solid waste and reprocessed to
become a source of raw materials, as opposed to virgin raw materials. Unless
otherwise specified, none of the above shall be interpreted to mean that the use
of used or rebuilt products are allowed under this specification.
3.5 Interchangeability. All units of the same classification furnished with
similar options under a specific contract shall be identical to the extent
necessary to insure interchangeability of component parts, assemblies,
accessories, and spare parts.
3.6 Maintainability. The crane design, together with component and
accessory location and installation, shall permit ready accessibility to all
items requiring periodic maintenance service in the field, which will be
accomplished with the use of conventional general-purpose tools associated with
equipment of this nature. The replacement and adjustment of components And
accessories shall be accomplished with minimum drainage requirements and minimum
disturbance to other elements of the crane.
3.7 Safety. The crane shall comply with OSHA regulations and ANSI B30.5.
All rotating or reciprocating parts and all parts subject to high operational
temperatures, that are of such a nature or are so located as to become a hazard
to the operating or attending personnel, shall be substantially guarded, or
insulated, to the extent necessary to eliminate the hazard. The principal
platform walking surfaces shall be of an antiskid type. Ladders, steps, and
handholds shall be provided in such quantity and of such size on the sides of
the crane cab or super-structure that entrance thereto and exit therefrom may be
unhampered and nonhazardous. Engine cooling fans shall have heavy grille or
ring type guards. Crane shall be equipped with an audible alarm to alert when
crane is being moved forward or backwards in accordance with SAE.J994.
3.7.1 Hazard marking stripes. Hazard marking stripes shall be applied to
the counterweight, boom point and hook block cheek plates. Stripes shall be
manufacturers standard safety yellow applied over the crane paint. Stripes
shall be 2 inches wide spaced 2 inches apart and extending at a 45 deg angle
from the vertical.
3.8 Safe load capacities chart. A permanent chart indicating all the safe
load capacities on each boom reach and radii, shall be posted in the crane cab
near the operator and also on the outside of the crane. The safe load capacity
chart shall reflect the manufacturer's standard commercial rating for the size
and model crane furnished, and not be limited to the minimum required capacities
specified.
3.9 Transportability. The crane shall be so designed and constructed that
it can be conveniently disassembled into major components that come within the
size and weight limitations for rail and highway transport.
3.10 Performance.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business